mk 1 burner change

General Aga and other range cooker related chat.

Moderators: Moderator, Admin

mk 1 burner change

Postby theherbman on Tue Nov 18, 2014 4:48 pm

Hi

I posted this in the wrong section before

I have changed the burner unit on my lpg BF Mk 1 as the old gas stat seized, on the old unit I had an el operated valve which fitted onto the main jet inlet pipe so that a time clock could be fitted but the pilot remain alight, It worked very well for around 40 yrs until the the stat failed. The new gas valve is a low fire type, i.e. wait 30 mins or so and turn up to normal fire, I know that fitting a time clock like this is not a normal thing to do but as I am not in England, the English regs do not apply. Does anyone know if there is a gas valve that can be fitted that will allow me to connect a time clock. Forget about the aims system. I can turn it all off and on by hand but then I have to wait for it to reach working temp.

Regards Mel
theherbman
 
Posts: 49
Joined: Mon Nov 22, 2010 7:59 am

Return to General

Who is online

Users browsing this forum: No registered users and 10 guests